Converters Archives - RGB Logic https://rgblogicav.com/product-category/converters/ AUDIO VIDEO product Manufacturer Wed, 11 Mar 2026 19:14:27 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://rgblogicav.com/wp-content/uploads/2024/05/WhatsApp_Image_2024-05-11_at_7.13.10_PM-removebg-preview-50x50.png Converters Archives - RGB Logic https://rgblogicav.com/product-category/converters/ 32 32 shopengine_activated_templates a:0:{} RL-TCH01 https://rgblogicav.com/product/rl-tch01/ Mon, 16 Feb 2026 20:15:57 +0000 https://rgblogicav.com/?post_type=product&p=11118 4K@60Hz Type-C to HDMI Adapter
  • Zero Latency
  • 4K@60Hz
  • Mirror/Extend Mode
  • Plug and Play
  • Compact Design

The post RL-TCH01 appeared first on RGB Logic.

]]>

The post RL-TCH01 appeared first on RGB Logic.

]]> RL-DPH01 https://rgblogicav.com/product/rl-sdh01-2/ Mon, 16 Feb 2026 20:02:10 +0000 https://rgblogicav.com/?post_type=product&p=11110 4K@60Hz DP1.4 to HDMI2.0 Converter
  • 4K@60Hz and HDR, compatible 4K@30Hz
  • Supports content protection of HDCP

The post RL-DPH01 appeared first on RGB Logic.

]]>

The post RL-DPH01 appeared first on RGB Logic.

]]> RKV679P-DVB-T-V2.0 https://rgblogicav.com/product/rkv679p-dvb-t-v2-0/ Sun, 15 Feb 2026 08:07:12 +0000 https://rgblogicav.com/?post_type=product&p=11061 4K HDMI to DVBT UHD modulator
  • Support multiple modulators to be installed to distribute as many channels you need.
  • Distribute one source to multiple displays with one modulator via CATV splitter.
  • Support DVB-T digital high definition RF signal output
  • HDMI input signal resolution up to 3840x2160@60Hz, RF output up to 3840x2160@30Hz .
  • Support DVB-T digital high definition RF signal output.

The post RKV679P-DVB-T-V2.0 appeared first on RGB Logic.

]]>

The post RKV679P-DVB-T-V2.0 appeared first on RGB Logic.

]]> RKV379P-DVB-T-V2.0 https://rgblogicav.com/product/rkv379p-dvb-t-v2-0/ Sun, 15 Feb 2026 08:00:42 +0000 https://rgblogicav.com/?post_type=product&p=11057 1080p@60Hz HDMI to DVBT modulator
  • Support multiple modulators to be installed to distribute as many channels you need.
  • Distribute one source to multiple displays with one modulator via CATV splitter.
  • Support DVB-T digital high definition RF signal output
  • HDMI input signal resolution up to full HD 1080P@60Hz.
  • Support DVB-T digital high definition RF signal output.

The post RKV379P-DVB-T-V2.0 appeared first on RGB Logic.

]]>

The post RKV379P-DVB-T-V2.0 appeared first on RGB Logic.

]]> RKV379P-DVB-T-4.0 https://rgblogicav.com/product/rkv379p-dvb-t-4-0/ Thu, 01 Jan 2026 12:35:36 +0000 https://rgblogicav.com/?post_type=product&p=10234 HDMI To DVB Converter

Thisis anHDMI™ to DVB-T Converter, perfect solutionto distribute HDMI™ signal to DVB-T1 standard digital cable television via coaxial cables. Output can be set as any channel number and distributed to all the TV'S in the system directly via CATV splitter

Product Overview

The product shown is an HDMI to DVB‐T Converter designed to take an HDMI signal from a source device and convert it into a DVB‐T digital TV signal that can be distributed over coaxial cables to multiple televisions. It supports HDMI 1.3 with full HDCP1.2 compatibility and handles HDMI TMDS signals from 0.5–1.5 Vpp, while using a 5 Vpp TTL HDMI DDC signal for communication. The converter operates with input HDMI resolutions from standard definition 480p and 576p up to 720p and 1080p at a variety of frame rates, making it suitable for most modern media players and set‐top boxes. Video is encoded in H.264 format, audio is encoded using MPEG‐2 and output as stereo PCM at 44.1 kbit/s or 48 kbit/s, ensuring good quality audiovisual transmission over the DVB‐T standard.

Signal and broadcasting parameters

The converteroutputs a DVB‐T standardRF signal over coaxialcables, using typical broadcast coax types such as RG6, RG7, or RG11, and supports a working frequency range from 177.5 MHz to 866 MHz. It offers an effective bit‐rate of up to 24 Mbit/s, with RF output power adjustable between about −40 dBm and −13 dBm, and an insertion loss of around 0 dBm, which helps maintain signal quality in distribution systems. The RF interface follows the British 75‐ohm F‐type connector standard, allowing easy integration with existing CATV splitters and TV tuners. 

Download Brochure

The post RKV379P-DVB-T-4.0 appeared first on RGB Logic.

]]>

Performance and latency

Thedevice isdesigned forstableoperation inprofessionalorhome distribution setups, with typical end‐to‐end delay in the range of 200–300 ms, depending on the decoding performance of the receiving TVs or set‐top boxes. This latency is acceptable for most broadcasting and monitoring applications where real‐time interactivity is not critical, such as feeding HDMI output from media players, satellite receivers, or information display systems into a coaxial network.

Power, environment, and physical details

Powerissupplied by a DC 12V / 1 A adapter, and the unit consumes less than 7 W,making itenergy‐efficient for continuous 24/7 operation. It is specified to work in ambient temperatures from approximately −20 °C to +60 °C, with storage temperatures from about −30 °C to +70 °C and relative humidity from 0–90% without condensation, which suits a range of indoor environments including equipment rooms and control cabinets. The enclosure is a compact black box measuring roughly 158 × 114.3 × 33 mm and weighing around 520 g, so it can be easily mounted on shelves or within racks as part of a larger distribution system. 

Specifications

HDMI input signal: HDMI 1.3, fully compatible with HDCP 1.2. HDMI DDC signal level: 5 Vp‐p (TTL). HDMI TMDS signal level: 0.5–1.5 Vp‐p (TMDS). Supported HDMI resolutions: 480i@60 Hz, 480p@60 Hz, 576i@50 Hz, 576p@50 Hz, 720p@50/60 Hz, 1080i@50/60 Hz, 1080p@24/25/30/50/60 Hz. Video encoding format: H.264. Audio encoding format: MPEG‐2. Output standard over coaxial: DVB‐T. Recommended coaxial cable types: RG6, RG7, RG11. RF frequency range: 177.5 MHz to 866 MHz. Maximum effective bitrate: 24 Mbit/s. Insertion loss: 0 dBm. RF output power (TX): −40 dBm to −13 dBm. RF interface: British system 75 Ω F‐type connector. Typical delay time: 200–300 ms (depends on decoder in receiver). Audio output format: Stereo PCM (44.1 kbps, 48 kbps). Power supply requirement: DC 12 V / 1 A. Power consumption: less than 7 W.

Effortless Installation and Use

The splitteris designedfor easyinstallationand operation, with a simpleplug-and-play setup that requires no software or drivers . The user manual provides clear connectiondiagrams and instructions to guide you through the process . To get started, you simply connect your HDMI source to the input port and your displays to the output ports . 

The post RKV379P-DVB-T-4.0 appeared first on RGB Logic.

]]> RL-HDBT70AD-UK https://rgblogicav.com/product/hdbt70ad/ Sat, 20 Dec 2025 19:21:43 +0000 https://rgblogicav.com/?post_type=product&p=10029 18G HDMI 1-GANG UK WALL PLATE POC 70M WITH RX

The 4K60 HDBaseT Wall Plate (70m/CN-UK-1GANG, model RL-HDBT70AD-UK) is a single‑gang HDMI wall‑plate transmitter that sends 4K video and audio over a single Cat6/6a cable up to 70 m for 1080p and 40 m for 4K signals, while also supporting control and power over cable for a clean installation in CN/UK‑style wall boxes.

18G HDMI 1-Gang UK Wall Plate POC 70M with RX

This wall‑plate provides one HDMI input and a separate analog audio input in a compact 86 mm × 86 mm housing, allowing a source device such as a media player or laptop to be connected at the wall and extended to a remote HDBaseT receiver or compatible projector.It delivers uncompressed HDMI 2.0b video with embedded audio, supports audio embedding at the transmitter and de‑embedding at the receiver, and includes two‑way IR and RS‑232 for remote control and system integration. The unit supports 24 V power‑over‑cable (POC) or local DC 24 V power, simplifying deployment in meeting rooms, classrooms, and digital signage installations.

Download Brochure

The post RL-HDBT70AD-UK appeared first on RGB Logic.

]]>

Video and audio performance

The wall plate is compliant with HDMI 2.0b and HDCP 2.2 and supports up to 18 Gbps video bandwidth, enabling resolutions up to 4K at 60 Hz with 4:4:4 chroma subsampling for high‑quality images. It supports multiple colour spaces (RGB and YCbCr 4:4:4 / 4:2:2 / 4:2:0) and 8‑, 10‑, or 12‑bit colour depth, along with HDR formats including HDR, HDR10, HDR10+, Dolby Vision, and HLG for enhanced dynamic range and colour reproduction. Audio support includes HDMI LPCM and a wide range of surround formats such as Dolby Digital/Plus/TrueHD and DTS variants, as well as 2‑channel analog PCM via the 3.5 mm input, making it suitable for both basic and advanced AV systems.

Key features

HDMI 2.0b and HDCP 2.2 compliant with 18 Gbps bandwidth for 4K60 4:4:4 video. Extends 1080p up to 70 m and 4K up to 40 m over a single Cat6/6a cable using HDBaseT technology. Supports HDR (HDR10, HDR10+, Dolby Vision, HLG) and 8/10/12‑bit colour for high‑dynamic‑range visuals. Provides audio embedding at the transmitter and de‑embedding at the receiver for flexible audio routing. Includes two‑way IR and RS‑232 control, POC 24 V or local 24 V power options, and robust ESD protection.

The post RL-HDBT70AD-UK appeared first on RGB Logic.

]]> RL-SDH01 https://rgblogicav.com/product/rl-sdh01/ Sat, 20 Dec 2025 19:04:29 +0000 https://rgblogicav.com/?post_type=product&p=10010 SDI TO HDMI CONVERTER
Product Overview

The SDI to HDMI Converter with SDI Loop Out is a compact video interface device that converts professional SDI signals (SD‑SDI/HD‑SDI/3G‑SDI) to HDMI while also providing an SDI loop output for monitoring or daisy‑chaining. It supports a wide range of resolutions up to full HD 1080p at 60 Hz, making it suitable for cameras, switchers, and other broadcast equipment feeding standard HDMI displays or projectors.

Physical Design

The converter usesa metalhousing (often iron or aluminum), which helps with durability and heat dissipation in professional environments. It is compact and lightweight (around a few hundred grams, with dimensions close to 100–110 mm on the longest side), so it can be easily mounted near cameras, racks, or behind monitors without taking much space. 

Download Brochure

The post RL-SDH01 appeared first on RGB Logic.

]]>

Power and Working Conditions

Theconverter is powered by a DC 5 V / 1 A adapter and is designed to work with a wide input voltage range from 5 V to 36 V, giving flexibility with different power sources in studio or field setups. Its specified operating temperature range is approximately 0–60 °C, allowing reliable operation in typical indoor and many controlled outdoor environments. 

Video Input and Output Support

On the SDI side, the unitaccepts SD,HD, and 3GSDIformats, covering resolutions such as 480i/576i, 720p at common frame rates, and 1080i/1080p at multiple frame rates including up to 60 Hz. The HDMI output is available in HD formats like 720p and 1080p at up to 60 Hz, so the connected monitor or TV can display clean, full‑HD video converted from the SDI source. 

Future‑oriented Features

Supports 3GSDI, allowing usewith many current HD broadcast workflows and cameras. Wide power input range makes it suitable for battery‑powered field use and varied studio power systems. SDI loop out simplifies expansion to additional monitors or recorders without needing extra distribution equipment. Full‑HD 1080p HDMI output keeps it relevant for most existing displays and projectors used in production environments.

The post RL-SDH01 appeared first on RGB Logic.

]]>